Nitrous oxide (N₂O) emissions from a pilot-scale oxidation ditch under different COD/N ratios, aeration rates and two...

Nitrous oxide (N₂O) generated from wastewater treatment plants (WWTPs) has drawn attention due to its high emission load and significant greenhouse effect. In the present study, N₂O emissions from a pilot-scale Carrousel oxidation ditch under various chemical oxygen demand (COD) to nitrogen ratio (COD/N) and aeration rates were systematically investigated. The highest N₂O emission factor was 0.142 ± 0.013%, at COD/N of 5 and aeration rate of 1.8 m³ h^-1, which was much lower than the majority of previous studies. The results could be attributed to the high internal recycle ratio of the oxidation ditch process which lightened the burden of influent load to the system. The profiles of N₂O emissions and dissolved N₂O concentration along the channels showed a distinct spatial variation that N₂O emissions primarily occurred in the aeration zones due to the air stripping effect. However, both the aeration and anoxic zones contributed to N₂O generation due to autotrophic nitrification (AN), which was considered to be the main N₂O generation process. In addition, two simulated shock-load conditions, ammonia overload shock and aeration failure shock, were carried out to explore the response of the biological nitrogen removal (BNR) system. The results indicated that both shock-loads lead to excessive N₂O emissions, especially at higher aeration rates, which could be explained by the improved N₂O generation by AN process during the shock-load period. This study offered new insights into the role of operational parameters to N₂O emission and the alternative approach for N₂O mitigation during both the steady-state operation and shock-load conditions in the oxidation ditch process.