Heterostructured Titanium Oxynitride-Manganese Cobalt Oxide Nanorods as High-Performance Electrode Materials for...

Metal oxynitrides have been considered recently as emerging electrode materials for supercapacitors. Herein, we converted titanate nanotubes into a series of titanium oxynitride (TiON) nanorods at nitridation temperatures of 800, 900, and 1000 °C in ammonia gas and tested them as supercapacitor electrodes. TiON-800, TiON-900, and TiON-1000 showed capacities of 60, 140, and 71 F g^-1, respectively, at a current density of 1 A g^-1. However, because of TiON's low capacity, a heterostructure (TiON-900/MnCo₂O₄) was designed based on the optimized TiON with MnCo₂O₄ (MCO). The heterostructure TiON-900-MCO and MCO electrode materials showed specific capacities of 515 and 381 F g^-1, respectively, at a current density of 1 A g^-1. The cycling stability retention of TiON-900 and MCO were 75 and 68%, respectively; moreover, the heterostructure of TiON-900-MCO reached 78% at a current density of 5 A g^-1 over 5000 cycles. The increased capacity and sustained cycling stability retention are attributable to the synergistic effect of TiON-900 and MCO. A coin cell (CC)-type symmetric supercapacitor prototype of TiON-900-MCO was fabricated and tested in the voltage range of 0.0-2.0 V in 1 M LiClO₄ in propylene carbonate/dimethyl carbonate electrolyte, and a 79% cycling retention capacity of TiON-900-MCO-CC was achieved over 10 000 cycles at a current density of 250 mA g^-1. We demonstrated a prototypical single cell of TiON-900-MCO-CC as a sustained energy output by powering a red-light emitting diode that indicated TiON-900-MCo electrode materials' potential application in commercial supercapacitor devices.