Dual-Shell Photothermoelectric Textile Based on a PPy Photothermal Layer for Solar Thermal Energy Harvesting

To simply and effectively enhance the conversion capability of wearable thermoelectric textiles, a two-step in situ method is adopted to fabricate dual-shell photothermoelectric textiles which is made of polypropylene fibers with a photo-thermal layer (PPy) and a thermoelectric layer (PEDOT:Tos). The PPy is tailored to achieve high temperature and photothermoelectric effects. The PPy layer can significantly increase the photothermal conversion efficiencies of as-prepared fabric. The optimized photothermoelectric fabric can improve the generated voltage output from 294.13 to 536.47 μV under the infrared light, and its power density is up to 13.76 nW·m^-2. A flexible photothermoelectric strip composed of as-prepared fabric coated with Ag particles and textile substrates with low thermal conductivity shows a voltage output of 2.25, 0.677, and 0.183 mV and a power output of 0.7031, 0.0636, and 0.0049 nW under IR light, sunlight, and on the arm, respectively. The photothermoelectric fabrics display potential as to a new smart wearable device for converting light and electricity.