Sparse-Aware Bias-Compensated Adaptive Filtering Algorithms Using the Maximum Correntropy Criterion for Sparse System
Wentao Ma1,2, Dongqiao Zheng1, Zhiyu Zhang1
1School of Automation and Information Engineering, Xi'an University of Technology, Xi'an 710048, China.
Abstract:
To address the sparse system identification problem under noisy input and non-Gaussian output measurement noise, two novel types of sparse bias-compensated normalized maximum correntropy criterion algorithms are developed, which are capable of eliminating the impact of non-Gaussian measurement noise and noisy input. The first is developed by using the correntropy-induced metric as the sparsity penalty constraint, which is a smoothed approximation of the ℓ 0 norm. The second is designed using the proportionate update scheme, which facilitates the close tracking of system parameter change. Simulation results confirm that the proposed algorithms can effectively improve the identification performance compared with other algorithms presented in the literature for the sparse system identification problem.
Related Concept Videos
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Residuals and Least-Squares Property
If the observed data point lies above the line, the residual is positive, and the line underestimates the actual data value for y. If the observed data point lies below the line, the residual is negative, and the line overestimates the actual data value for y.
The process of fitting the best-fit...
Aliasing
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original...
Calibration Curves: Linear Least Squares
For data that follow a straight line, the standard method for fitting is the linear...
Multi-input and Multi-variable systems
In the absence of...


