Related Experiment Video
Updated: Nov 27, 2025

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
An empirical modeling approach to predicting pollutant loads and developing cost-effective stormwater treatment
Joo-Hyon Kang1, Mi-Hyun Park2, Simon J Ha2
1Dept. of Civil and Environmental Engineering, Dongguk University-Seoul, Seoul 04620, South Korea.
Abstract:
Stormwater treatment strategies were evaluated for the upper Ballona Creek Watershed in Los Angeles, CA using an empirical model of stormwater runoff quantity and quality with zeroth-order regularization and a limited memory Broyden-Fletcher-Goldfarb-Shanno Bound constrained optimization routine. The model used landuse based estimation on the runoff volume, event mean concentration (EMC) and pollutant load employing ten different landuses, including highways and local roads. The model was validated by showing that its predictions were in reasonable agreement (r2 ~0.6 to 0.8) with total zinc (Zn), Total Kjeldahl Nitrogen (TKN), and Total Suspended Solids (TSS) loadings measured at the monitoring site at the bottom of the watershed. The developed model was used to demonstrate and quantify the benefits of the stormwater treatment practices (STPs) prioritized at specific landuses with high pollutant mass emission rates. For this demonstration, total Zn was selected as it is one of the most concerning pollutants in an extremely urbanized area such as the Ballona Creek Watershed. Transportation landuse including local roads and highways was found to be the best candidate for the STP applications due to their high percent load contribution per percent area. By focusing STPs for transportation landuse, the water quality goal of total Zn in the study watershed was expected be achieved at approximately 75% less cost.
Related Concept Videos
Typical Model Studies
Mechanistic Models: Compartment Models in Individual and Population Analysis
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Design Example: Creating a Hydraulic Model of a Dam Spillway
Modeling and Similitude

