Related Experiment Video
Updated: Nov 27, 2025

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices
Published on: December 7, 2017
Gate Bias Stress Instability and Hysteresis Characteristics of InAs Nanowire Field-Effect Transistors
Changyong Lan1, SenPo Yip, Xiaolin Kang
1State Key Laboratory of Electronic Thin Films and Integrated Devices, and School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 610054, P. R. China.
Abstract:
Because of the excellent electrical properties, III-V semiconductor nanowires are promising building blocks for next-generation electronics; however, their rich surface states inevitably contribute large amounts of charge traps, leading to gate bias stress instability and hysteresis characteristics in nanowire field-effect transistors (FETs). Here, we investigated thoroughly the gate bias stress and hysteresis effects in InAs nanowire FETs. It is observed that the output current decreases together with the threshold voltage shifting to the positive direction when a positive gate bias stress is applied, and vice versa for the negative gate bias stress. For double-sweep transfer characteristics, the significant hysteresis behavior is observed, depending heavily on the sweeping rate and range. On the basis of complementary investigations of these devices, charge traps are confirmed to be the dominant factor for these instability effects. Importantly, the hysteresis can be simulated well by utilizing a combination of the rate equation for electron density and the empirical model for electron mobility. This provides an accurate evaluation of carrier mobility, which is in distinct contrast to the overestimation of mobility when using the transconductance for calculation. All these findings are important for understanding the charge trap dynamics to further enhance the device performance of nanowire FETs.
More Related Videos
Related Concept Videos
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Characteristics of JFET
The core of a JFET's operation is controlling drain current by modulating the gate-source voltage. When the drain and gate voltage are set to zero, the JFET exhibits no net current flow, representing a state of equilibrium. The drain current increases linearly as the...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...

