Comparison of Primary Laser Spectroscopy and Mass Spectrometry Methods for Measuring Mass Concentration of Gaseous...

We present a direct comparison between two independent methods for the measurement of gaseous elemental mercury (GEM) mass concentration: isotope dilution cold-vapor inductively coupled plasma mass spectrometry (ID-CV-ICP-MS) and laser absorption spectroscopy (LAS). The former technique combined with passive sorbent tube sampling is currently the primary method at NIST for mercury gas standards traceability to the International System of Units (SI). This traceability is achieved via measurements on a mercury-containing reference material. The latter technique has been recently developed at NIST and involves real-time measurements of light attenuation caused by GEM, with SI traceability based in part on the known spontaneous emission lifetime of the probed 6 ¹S₀-6 ³P₁ intercombination transition of elemental mercury (Hg⁰). Using a steady-flow Hg⁰-in-air generator to produce samples measured by both methods, we use LAS to measure the sample gas and in parallel we collect the Hg⁰ on sorbent tubes to be subsequently analyzed using ID-CV-ICP-MS. Over the examined mass concentration range (41 microg/m³ to 287 microg/m³ Hg⁰ in air), the relative disagreement between the two approaches ranged from (1.0 to 1.8)%. The relative combined standard uncertainty on average is 0.4% and 0.9%, for the LAS and MS methods, respectively. Our comparison studies help validate the accuracy of the ID-CV-ICP-MS primary method as well as establish the LAS technique as an attractive alternative primary method for SI-traceable measurements of GEM.