Related Experiment Video
Updated: Nov 26, 2025

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Anionic polyacrylamide influence on the lead(II) ion accumulation in soil - the study on montmorillonite
G Fijałkowska1, K Szewczuk-Karpisz2, M Wiśniewska1
1Department of Radiochemistry and Environmental Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Sklodowska University in Lublin, M. Curie-Sklodowska Sq. 3, 20-031 Lublin, Poland.
Purpose:
Polymeric substances, as soil conditioners, limit the erosion process as well as improve the soil structure. The same macromolecular compounds may influence the heavy metal accumulation in soil environment. The main aim of this study was investigation of anionic polyacrylamide (AN PAM) effect on the lead(II) ion sorption on the montmorillonite surface. The effects of Pb(II) ion concentration, sequence of heavy metal and anionic polymer addition into the system as well as anionic group content in the PAM macromolecules were also studied.
Materials And Methods:
The study was performed on montmorillonite (clay mineral). Two types of polymers were used: AN PAM 5% and AN PAM 30% containing 5% and 30% of carboxylic groups, respectively. The adsorbed amounts of Pb(II) ions or AN PAM on the solid were determined spectrophotometrically. Electrokinetic properties of the examined systems were established using potentiometric titration and microelectrophoresis method. The montmorillonite aggregation without and with selected substances was described based on the sedimentation study.
Results:
At pH 5 the Pb(II) adsorbed amount on montmorillonite equaled 0.05 mg/m2 (for the initial concentration 10 ppm). Anionic polyacrylamide increased this value significantly (it was 0.11 mg/m2 with AN PAM 5% and 0.11 mg/m2 with AN PAM 30%). The lead(II) ions presence causes a slight increase of the anionic PAM adsorption on the montmorillonite surface. For example, for the initial polymer concentration 100 ppm, the AN PAM 5% adsorbed amount without Pb(II) equaled 0.49 mg/m2, whereas with Pb(II) - 0.57 mg/m2. What is more, anionic polyacrylamide and lead(II) ions affected electrokinetic properties and stability of the montmorillonite suspension.
Conclusions:
Anionic polyacrylamide makes the Pb(II) accumulation on the montmorillonite surface larger and, as a consequence, reduces the Pb(II) availability to organisms. Therefore, this macromolecular compound can certainly be used to remediate soils contaminated with heavy metals.
Related Concept Videos
Extraction: Advanced Methods
Factors Affecting Solubility
Ionic Strength: Effects on Chemical Equilibria
In this solution, the primary...
Ion Exchange
Colloidal precipitates
Precipitation of Ions
The equation that describes the equilibrium between solid calcium carbonate and its solvated ions is:

