Review on the NO removal from flue gas by oxidation methods

Meng Si1, Boxiong Shen1, George Adwek2

  • 1Tianjin Key Laboratory of Clean Energy and Pollutant Control, School of Energy and Environmental Engineering, Hebei University of Technology, Tianjin300401, China.

Related Concept Videos

Sample Preparation for Analysis: Advanced Techniques01:08

Sample Preparation for Analysis: Advanced Techniques

Accurate analysis of complex samples often requires advanced preparation techniques to achieve reliable and reproducible results. Samples containing inorganic or organic materials can be challenging to dissolve or decompose effectively. Standard sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion.
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
918
Flame Photometry: Overview01:02

Flame Photometry: Overview

Flame photometry, also known as flame emission spectrometry, is a technique used for the qualitative and quantitative analysis of elements present in a sample using a flame as the source of excitation energy. The concept of flame photometry was realized in the early 1860s by Kirchhoff and Bunsen, who discovered that specific elements emit characteristic radiation when excited in flames. The first instrument developed for this purpose was used to measure sodium (Na) in plant ash using a Bunsen...
1.1K
Atomic Absorption Spectroscopy: Atomization Methods01:25

Atomic Absorption Spectroscopy: Atomization Methods

Atomic Absorption Spectroscopy (AAS) atomizes samples through flame atomization or electrothermal atomization. Flame atomization typically involves a nebulizer and spray chamber assembly to combine the sample with a fuel–oxidant mixture, creating a fine aerosol mist that enters a burner. Typically, the fuel and oxidant are combined in an approximately stoichiometric ratio. However, for atoms that are easily oxidized, a fuel-rich mixture may be more advantageous. Only about 5% of the...
1.0K
Oxidation of Alcohols02:37

Oxidation of Alcohols

In this lesson, the oxidation of alcohols is discussed in depth. The various reagents used for oxidation of primary and secondary alcohols are detailed, and their mechanism of action is provided.
The process of oxidation in a chemical reaction is observed in any of the three forms:
14.8K
Flame Photometry: Lab01:16

Flame Photometry: Lab

In a flame photometer, when a solution like potassium chloride is aspirated into the flame, the solvent evaporates, leaving behind dehydrated salt. This salt dissociates into free gaseous atoms in their ground state. Some of these atoms absorb energy from the flame, leading to their excitation. The excited atoms return to the ground state, emitting photons at characteristic wavelengths. Because only electronic transitions are involved, the resulting emission lines are very narrow. The intensity...
637
Oxidation of Alkenes: Anti Dihydroxylation with Peroxy Acids02:04

Oxidation of Alkenes: Anti Dihydroxylation with Peroxy Acids

Diols are compounds with two hydroxyl groups. In addition to syn dihydroxylation, diols can also be synthesized through the process of anti dihydroxylation. The process involves treating an alkene with a peroxycarboxylic acid to form an epoxide. Epoxides are highly strained three-membered rings with oxygen and two carbons occupying the corners of an equilateral triangle. This step is followed by ring-opening of the epoxide in the presence of an aqueous acid to give a trans diol.
6.8K