Related Experiment Video
Updated: Nov 25, 2025

A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
Pore size distributions and pore multifractal characteristics of medium and low-rank coals
Bin Sun1, Qing Yang1, Jie Zhu2
1Department of Coalbed Methane, Research Institute of Petroleum Exploration and Development, PetroChina, Beijing, 100083, China.
Abstract:
It is of great significance to study the porosity and permeability properties of medium and low-rank coal. The porosity and permeability in confining stress experiments were used to simulate the porosity and permeability variations of coal samples under different depth conditions. The pore structure of Baoqing coal samples is greatly affected by the confining pressure, and the pores and micro cracks are more easily compressed. Based on the experimental data of mercury intrusion porosimetry (MIP) and nitrogen adsorption (NA), the pore size distributions (PSDs) of medium and low-rank coals were studied. High mercury intrusion pressure would lead to coal matrix compression. Therefore, the pore volume calculated by MIP data was corrected by NA data. The PSDs characteristics of Jixi (JX) coal and Baoqing (BQ) coal samples are obtained from the revised pore volume, and the dominant pores of medium and low-rank coals are obtained. The results show that JX coal has higher spatial heterogeneity, connectivity and pore autocorrelation. Micro fractures have an influence on the autocorrelation and heterogeneity of coal samples, especially for BQ coal samples.
More Related Videos
Related Concept Videos
Pore Size Distribution
Adequate...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Porosity in Cement Paste
The balance of water to cement in the mix is...
Shape and Texture of Coarse Aggregate
Factors Affecting Dissolution: Particle Size and Effective Surface Area

