Impact of hydraulic retention time on phosphorus removal from wastewater using reactive media

Phosphorus (P) discharge from wastewater treatment plants into the environment contributes to eutrophication issues. Reactive media filters represent an effective, simple and cost-effective solution to decrease the P content. Previous research used various experimental designs and often synthetic wastewater, making assessment of real-world performance difficult. This study assesses the impact of the hydraulic retention time (HRT) on P removal using real wastewater to refine design criteria for full-scale installations. Four media were compared in column experiments for >200 days. Different HRTs were applied and initially the media achieved low P effluent concentrations of >0.1 mg/L PO₄-P, increasing over time. Best P removal was observed for the highest HRT with on average >99%. HRT was seen to be the driving factor for P removal rather than media capacity. Three of the four materials showed pH levels above 12 initially, decreasing over time. Water quality parameters, including organics, solids and metals, were monitored. In-depth analysis confirmed formation of calcium phosphate precipitation on the media's surface. The results suggest the importance of an optimal HRT to achieve high P removal and show that the reactive media application is an appropriate technology for P removal on small sites if the elevated pH is addressed.