Selective Laser Melting of Patient Individualized Osteosynthesis Plates-Digital to Physical Process Chain

We report on the exemplified realization of a digital to physical process chain for a patient individualized osteosynthesis plate for the tarsal bone area. Anonymized patient-specific data of the right feet were captured by computer tomography, which were then digitally processed to generate a surface file format (standard tessellation language, STL) ready for additive manufacturing. Physical realization by selective laser melting in titanium using optimized parameter settings and post-processing by stress relief annealing results in a customized osteosynthesis plate with superior properties fulfilling medical demands. High fitting accuracy was demonstrated by applying the osteosynthesis plate to an equally good 3D printed bone model, which likewise was generated using the patient-specific computer tomography (CT) data employing selective laser sintering and polyamid 12. Proper fixation has been achieved without any further manipulation of the plate using standard screws, proving that based on CT data, individualized implants well adapted to the anatomical conditions can be accomplished without the need for additional steps, such as bending, cutting and shape trimming of precast bone plates during the surgical intervention. Beyond parameter optimization for selective laser melting, this exemplified digital to physical process chain highlights the potential of additive manufacturing for individualized osteosynthesis.