Impact of utilizing solid recovered fuel on the global warming potential of cement production and waste management system: A life cycle assessment approach

Cement production is responsible for a significant share of global greenhouse gas (GHG) emissions. A potential option to reduce the cement production emissions is to use alternative fuels which can have also an impact on emissions from the waste management sector. This work investigates the change in global warming potential (GWP) of ordinary Portland cement (OPC) production and affected waste management systems when conventional fuels are partially replaced by solid recovered fuel (SRF) made from commercial and industrial waste (C&IW). A life cycle assessment (LCA) was conducted with a functional unit of 1 metric tonne of OPC production and treatment of 194 kg of C&IW. Data from an existing cement plant have been used, where the share of SRF from total fuel energy demand increased from 0% to 53% between 2007 and 2016. Four scenarios were established with varying waste treatment methods and SRF share in the thermal energy mix of cement production. It was found that GHG emissions decreased by 20% from 1036 kg carbon dioxide (CO2), eq. (functional unit)-1 in Scenario 1 to 832 kg CO2, eq. (functional unit)-1 in Scenario 3. Furthermore, it is possible to reach a reduction of 30% to 725 kg CO₂, eq. (functional unit)-1 in Scenario by increasing the share of SRF to 80%. In conclusion, significant GHG emissions reduction can be achieved by utilizing SRF in cement production. Especially in the middle-income and low-income countries where waste is dumped to the open landfills, emissions could be reduced without huge investments to waste incineration plants.