Reprocessing of N95 masks: Experience from a resource-limited setting in India
Anusha Rohit1, Shankar Rajasekaran2, Suchitra Shenoy3
1Madras Medical Mission, Mogappair, Chennai, India.
Objectives:
Due to the surge in demand for N95 masks during the Covid-19 pandemic, and considering the situation in countries grappling with acute shortages of N95 masks, this study investigated the possibilities of decontamination and reuse of masks.
Methods:
Three N95 masks of different makes (A, B and C) were subjected to six decontamination methods: ultraviolet (UV) irradiation, isopropyl alcohol (IPA) dip, plasma sterilization (Sterrad®), ethylene oxide (ETO, 3M®), dry heat sterilization, and moist heat sterilization (autoclaving). The integrity of the N95 masks was assessed by measuring their particle filtering efficiency at particle sizes ranging 0.3-0.5 microns.
Results:
All the masks decontaminated with ETO and plasma sterilization retained over 95% particle filtering efficiency. Masks decontaminated using IPA dip and autoclaving showed a drop, and UV irradiation showed variations in particle size efficiency degradation after decontamination.
Conclusions:
Plasma sterilization is recommended for decontamination of N95 masks in low-resource settings. ETO is not recommended due to hazards associated with handling of ethylene oxide, although the filtering efficiency was retained. Since the UV irradiation method showed variations in results, evaluation of UV decontamination for N95 masks needs to be performed on a case-by-case basis.
Related Concept Videos
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:
PPE Use in Healthcare Settings II: Doffing
PPE Use in Healthcare Settings I: Donning
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Tracheostomy Care II: Procedure
Step 1: Perform hand hygiene, and put on personal protective equipment: gown, gloves, mask...
Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...


