Related Experiment Video
Updated: Oct 2, 2026

Electrochemical Preparation of Poly3,4-Ethylenedioxythiophene Layers on Gold Microelectrodes for Uric Acid-Sensing Applications
Published on: July 28, 2021
Electrocardiogram measurements in water using poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) nanosheets
Sho Mihara1,2, Hui-Lin Lee3, Shinji Takeoka2,4
1Graduate School of Advanced Science and Engineering, Waseda University, Tokyo, 162-8480 Japan.
Abstract:
Waterproof bioelectrodes enable long-term biological monitoring and the assessment of performances of athletes in water. Existing gel electrodes change their electrical properties even when covered with a waterproof film. Here, the authors present the poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/poly(styrene-butadiene-styrene) (SBS) bi-layer nanosheet and waterproof film for a comfortable waterproof bioelectrode. PEDOT:PSS/SBS is fully foldable with a conductivity loss of only 5%. This foldable nanosheet electrode provides a reliable electrical connection between the skin and the wire. The waterproof film-covered bioelectrode enables continuous monitoring of electrocardiograms in water, showing a signal-to-noise ratio of 21.5 dB for the R wave and 17.5 dB for the T wave, comparable to atmospheric measurements, and sensing a change in heart rate from 79 to 131 bpm during bathing.

