Convenient CNT-Paper Gas Sensors Prepared by a Household Inkjet Printer

A hydrosoluble light-sensitive polymer named PSAG (poly-styrenesulfonate acrylic acid glycidyl methacrylate) was synthesized by acrylic acid (AA), sodium 4-styrenesulfonate (SS), and glycidyl methacrylate (GMA). PSAG is used to modify multiwall carbon nanotubes (MWCNTs) with a length diameter between 0.004 and 0.016. An inkjet conductive ink was formed by well-dispersed MWCNTs in aqueous and organic solvents, which could adjust the surface tension and viscosity of the ink. Gas sensors were then fabricated using this conductive ink on a household inkjet printer. The sensors demonstrated good reproducibility and acceptable recovery time (<200 s) to ammonia, methanol, and acetone. The resistance of the inkjet-printed sensor electrodes remained stable in the process of bending the sensors to different angles because of ultraviolet curing.