Related Experiment Video
Updated: Nov 22, 2025
Assembly and Tracking of Microbial Community Development within a Microwell Array Platform
Published on: June 6, 2017
Primary Corrosion Processes for Polymer-Embedded Free-Standing or Substrate-Supported Silicon Microwire Arrays in
Kathleen M Kennedy1, Paul Andrew Kempler2, Miguel Cabán-Acevedo2
1Division of Engineering and Applied Science, California Institute of Technology, Pasadena, California 91125, United States.
Abstract:
Solar fuel devices have shown promise as a sustainable source of chemical fuels. However, long-term stability of light absorbing materials remains a substantial barrier to practical devices. Herein, multiple corrosion pathways in 1 M KOH(aq) have been defined for TiO2-protected Si microwire arrays in a polymer membrane either attached to a substrate or free-standing. Top-down corrosion was observed in both morphologies through defects in the TiO2 coating. For the substrate-based samples, bottom-up corrosion was observed through the substrate and up the adjacent wires. In the free-standing samples, uniform bottom-up corrosion was observed through the membrane with all wire material corroded within 10 days of immersion in the dark in 1 M KOH(aq).
