Microplastic contamination in a conventional wastewater treatment plant in Thailand

Plastic waste has become a global environmental concern. One type of plastic waste is microplastics (MPs), which can spread easily in the environment. Wastewater effluent is one of the land-based sources of MPs. This study investigates the amount of microplastic (MP) pollution in an urban wastewater treatment plant (WWTP) in Thailand. Water samples were collected and examined to find the types, morphology and sources of MPs. Wastewater was filtered through a set of sieves ranging from 5 mm to 0.05 mm. Sludge samples were also collected to find the potential risk from the application of dried sewage sludge. Fourier-transform infrared spectroscopy (FTIR) was used to confirm the types of MPs. The amount of MPs in the influent was 26.6 ± 11.8 MPs/L. More than one-third of MP particles were removed after a grit trap, followed by 14.24% removal in the secondary treatment. If the peak flow rate of the WWTP is reached, 2.32 × 10⁹ MP particles can be released daily. The amount of MPs in a sludge sample was 8.12 ± 0.28 × 10³ particles/kg dry weight. Dry sludge is one of the potential sources of MP contamination in agricultural soil. Most MPs in the liquid fraction and sludge sample were fibres. Results from FTIR analysis showed that the major types of MPs in the WWTP were polyester fibres, followed by polypropylene, polyethylene, silicone polymer and polystyrene. This finding indicates that a conventional WWTP may act as a path by which MPs enter the environment.