Influence of various water quality parameters on passive sampler accumulation kinetics of different metal valencies...

Stabilized liquid membrane devices (SLMDs) have been used for passive integrative sampling of metals in freshwater systems. Field measurements of metal accumulation on SLMDs can provide a time-weighted average mass of labile metals over the deployment period. We exposed SLMDs in the laboratory to 0.5 μM solutions of silver, zinc, or aluminum as nitrate salts at three levels of water hardness, measuring metal accumulation every 4 days for 32 days. We saw linear accumulation in all experimental treatments, except for silver in high hardness (345.9 mg/L as CaCO₃). The time-accumulation relationships indicated that metal sorption rates vary across valency with the lower valency metals generally accumulating at greater rates. Water hardness also affected accumulation rates and accumulated mass with greater rates as hardness increased for zinc and aluminum. The accumulated zinc mass at 32 days in soft water was 78% of the mass in hard water for zinc, and accumulated aluminum mass was 29% of the mass in hard water. Factors such as oleate formation on the SLMD surface and solution chemistry, including pH and chemical speciation, were evaluated in explaining our results. Our work supports that SLMDs have utility for sampling metals in freshwater over extended time periods, which may be beneficial when there is limited access to sites; it also provide important interpretive guidance for the use of SLMDs.