Related Experiment Video
Updated: Nov 22, 2025

Author Spotlight: Advancements in High-Performance Thermoelectric Thin Films Through Radio Frequency Magnetron Sputtering
Published on: May 17, 2024
Thermoelectric properties of GaN with carrier concentration modulation: an experimental and theoretical investigation
Ashish Kumar1, Saurabh Singh2, Ashutosh Patel3
1Inter-University Accelerator Centre, New Delhi, 110067, India. ashish@iuac.res.in dr.akmr@gmail.com.
Abstract:
The present work investigates the less explored thermoelectric properties of the n-type GaN semiconductor by combining both experimental and computational tools. The Seebeck coefficients of GaN epitaxial thin films were experimentally measured in the wide temperature range from 77 K to 650 K in steps of ∼10 K covering both low and high-temperature regimes as a function of the carrier concentration (2 × 1016, 2 × 1017, 4 × 1017 and 8 × 1017 cm-3). The measured Seebeck coefficient at room temperature was found to be highest (-374 μV K-1) at the lowest concentration of 4 × 1016 cm-3, and decreases in magnitude monotonically (-327.6 μV K-1, -295 μV K-1, -246 μV K-1 for 2 × 1017, 4 × 1017, 8 × 1017 cm-3, respectively) as the sample carrier concentration increases. The Seebeck coefficient remains negative in the entire temperature range under study indicating that electrons are the dominant carriers. To understand the temperature-dependent behaviour, we also carried out the electronic structure and transport coefficient calculations using the Tran-Blaha modified Becke-Johnson (TB-mBJ) potential and semiclassical Boltzmann transport theory implemented in WIEN2k and BoltzTraP code, respectively. The experimentally observed carrier concentrations were used in the calculations. The estimated results obtained under constant relaxation time approximations provide a very good agreement between the theoretical and experimental data of Seebeck coefficients in the temperature range from 260 to 625 K.
Related Concept Videos
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
Types of Semiconductors
Carrier Transport
Drift Current:
The drift of charge carriers is started by an external electric field (E). Charged particles, such as electrons and holes, experience an acceleration between collisions with lattice atoms. For electrons, this results in a drift velocity (vd) given by:
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
P-N junction

