An in vitro system to investigate IOL: Lens capsule interaction

Posterior capsule opacification (PCO) is the most common complication associated with intraocular lens (IOL) implantation. Unfortunately, current in vitro models cannot be used to assess the potential of PCO due to their failure to simulate the posterior curvature of the lens capsule (LC) and IOL, a factor known to affect PCO pathogenesis in clinic. To overcome such a challenge, a new system to study IOL: LC interaction and potentially predict PCO was developed in this effort. It is believed that the interactions between an IOL and the lens capsule may influence the extent of PCO formation. Specifically, strong adhesion force between an IOL and the LC may impede lens epithelial cell migration and proliferation and thus reduce PCO formation. To assess the adhesion force between an IOL and LC, a new in vitro model was established with simulated LC and a custom-designed micro-force tester. A method to fabricate simulated LCs was developed by imprinting IOLs onto molten gelatin to create simulated three dimensional (3D) LCs with curvature resembling the bag-like structure that collapses on the IOL post implantation. By pushing the LC mold vertically downward, while measuring the change in position of the bending bar with respect to its start position, the adhesion force between the IOLs and LCs was measured. An in vitro system that can measure the adhesion force reproducibly between an IOL and LC with a resolution of ~1 μN was established in this study. During system optimization, the 10% high molecular weight gelatin produced the best LC with the highest IOL: LC adhesion force with all test lenses that were fabricated from acrylic foldable, polymethylmethacrylate (PMMA) and silicone materials. Test IOLs exerted different adhesion force with the 3D simulated LCs in the following sequence: acrylic foldable IOL > silicone IOL > PMMA IOL. These results are in good agreement with the clinical observations associated with PCO performance of IOLs made of the same materials. This novel in vitro system can provide valuable insight on the IOL: LC interplay and its relationship to clinical PCO outcomes.