Related Experiment Video
Updated: Nov 21, 2025

Evaluating the Electrochemical Properties of Supercapacitors using the Three-Electrode System
Published on: January 7, 2022
Temperature dependence for high electrical performance of Mn-doped high surface area activated carbon (HSAC) as
Zambaga Otgonbayar1, Kamrun Nahar Fatema1, Sunhye Yang2,3
1Department of Advanced Materials Science and Engineering, Hanseo University, Seosan-si, Chungnam, 356-706, Republic of Korea.
Abstract:
Herein, we manufactured the positive and negative electrodes for the hybrid capacitor. The Mn-doped High surface area of Activated carbon composite used for the positive electrode and as-prepared composite was calcined at 600 °C and 800 °C. The morphological structures and pore-size distributions of MnYP-600HTT and MnYP-800HTT were characterized by means of XRD, SEM, EDAX, TEM, and BET. According to the BET specific surface-area evaluation, MnYP-600HTT and MnYP-800HTT were 1272.6 and 1388.1 m2/g, respectively. Total pore volumes were 0.627 and 0.687 cm3/g, which is beneficial for forming ion-transport channels in electrochemical reactions. The MnYP-600HTT electrode had a high specific capacity of 177.2 mAh/g at 20C, and the capacity retention was 64.8%. During the entire cycling, MnYP-600HTT had excellent cyclic stability in 500 cycles along with high efficiency. The robust design of the MnYP-600HTT and MnYP-800HTT cathode materials introduced in this work pave the way for designing next-generation supercapacitors operating at ultra-high C rates. The Mn-doped high surface of activated carbon had stable energy density and superior cycling stability that were demonstrated in supercapacitor systems.
More Related Videos
08:59Synthesizing a Gel Polymer Electrolyte for Supercapacitors, Assembling a Supercapacitor Using a Coin Cell, and Measuring Gel Electrolyte Performance
Published on: November 30, 2022
14:42Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators
Published on: April 25, 2020
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Capacitor With A Dielectric
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...
Capacitor in an AC Circuit
Consider a purely capacitive circuit consisting...
Energy Stored in a Capacitor: Problem Solving
Capacitor-discharge ignition is a type of ignition system commonly found in small engines where the energy released from a capacitor ignites an induction coil that, in turn, fires the spark plug.
To calculate the energy stored in a capacitor of...
Dielectric Polarization in a Capacitor
Capacitors
When a voltage source is connected to a capacitor, positive and negative charges accumulate on the opposite plates. This accumulation generates a potential difference that equals the product of the...