Related Experiment Video

Updated: Nov 21, 2025

Application of Design Aspects in Uniaxial Loading Machine Development
05:23

Application of Design Aspects in Uniaxial Loading Machine Development

Published on: September 19, 2018

6.2K

Design and optimization of integrated flexure mounts for unloading lateral gravity of a lightweight mirror for space

Liu Zhang, Tailei Wang, Fan Zhang

    Applied Optics
    |January 15, 2021
    PubMed

    More Related Videos

    A Guide to Structured Illumination TIRF Microscopy at High Speed with Multiple Colors11:15

    A Guide to Structured Illumination TIRF Microscopy at High Speed with Multiple Colors

    Published on: May 30, 2016

    25.7K
    Author Spotlight: Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon07:22

    Author Spotlight: Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon

    Published on: February 3, 2023

    7.4K

    Related Concept Videos

    Unsymmetric Loading of Thin-Walled Members01:23

    Unsymmetric Loading of Thin-Walled Members

    Thin-walled members with non-symmetrical cross-sections are vital to engineering structures, offering material efficiency and structural integrity. However, unsymmetrical loading on these members leads to complex stress distributions, resulting in simultaneous bending and twisting can cause deformation or structural failure. The interaction between bending and twisting requires detailed analysis to ensure structural resilience.
    The concept of the shear center is crucial in countering the...
    268
    Design of Prismatic Beams for Bending01:23

    Design of Prismatic Beams for Bending

    The design of prismatic beams, structural elements with a uniform cross-section, focuses on ensuring safety and structural integrity under load. The design process begins by determining the allowable stress, either from material properties tables, or by dividing the material's ultimate strength by a safety factor. This safety factor is essential for accommodating uncertainties, and varies depending on the material—timber, steel, or concrete—with each having unique strength and...
    507
    Flexural Stress01:16

    Flexural Stress

    When analyzing bending in symmetric members, it's crucial to understand how stresses distribute when subjected to bending moments. This stress distribution is effectively described by applying fundamental mechanics and material science principles, particularly Hooke's Law for elastic materials.
    Hooke's Law states that within the material's elastic limits, stress is directly proportional to strain. In a member experiencing a bending moment, the strain at any point is relative to its distance...
    518
    Design of Transmission Shafts01:16

    Design of Transmission Shafts

    The design of a transmission shaft is governed by two primary specifications: the power it transmits and its rotational speed. These parameters guide the selection of the shaft's material and cross-sectional dimensions, ensuring that the material's maximum shearing stress remains within the elastic limit while transmitting the desired power at the given speed. The system's power is intrinsically linked to the applied torque. The torque applied to the shaft can be calculated by reconfiguring the...
    599
    Impact Loading on a Cantilever Beam01:13

    Impact Loading on a Cantilever Beam

    The analysis of a cantilever beam with a circular cross-section subjected to impact loading at its free end illustrates the conversion of potential energy from a dropped object into kinetic energy, which is then absorbed by the beam as strain energy. This process is crucial for understanding how materials behave under dynamic loads, which is important in fields such as construction and aerospace.
    When an object is dropped onto the free end of a cantilever, its potential energy due to gravity is...
    665
    Eccentric Axial Loading in a Plane of Symmetry01:16

    Eccentric Axial Loading in a Plane of Symmetry

    Eccentric axial loading occurs when an axial load is applied away from the centroidal axis of a structural member. This scenario is common in engineering, where structural elements may not be directly aligned due to various design or functional requirements.
    405