Related Experiment Video
Updated: Nov 21, 2025

Nasal Brushing Sampling and Processing Using Digital High Speed Ciliary Videomicroscopy – Adaptation for the COVID-19 Pandemic
Published on: November 7, 2020
Airflow Characteristics in Aeromedical Aircraft: Considerations During COVID-19
Anthony John de Wit1, Ben Coates2, Michael John Cheesman3
1Air Ambulance Victoria, Essendon Fields, Melbourne, Victoria, Australia.
Objective:
The aeromedical transport of coronavirus patients presents risks to clinicians and aircrew. Patient positioning and physical barriers may provide additional protection during flight. This paper describes airflow testing undertaken on fixed wing and rotary wing aeromedical aircraft.
Methods:
Airflow testing was undertaken on a stationary Hawker Beechcraft B200C and Leonardo Augusta Westland 139. Airflow was simulated using a Trainer 101 (MSS Professional A/S, Odense Sø, Syddanmark, Denmark) Smoke machine. Different cabin configurations were used along with variations in heating, cooling, and ventilation systems.
Results:
For the Hawker Beechcraft B200C, smoke generated within the forward section of the cabin was observed to fill the cabin to a fluid boundary located in-line with the forward edge of the cargo door. With the curtain closed, smoke was only observed to enter the cockpit in very small quantities. For the Leonardo AW139, smoke generated within the cabin was observed to expand to fill the cabin evenly before dissipating. With the curtain closed, smoke was observed to enter the cockpit only in small quantities CONCLUSION: The use of physical barriers in fixed wing and rotary wing aeromedical aircraft provides some protection to aircrew. Optimal positioning of the patient is on the aft stretcher on the Beechcraft B200C and on a laterally orientated stretcher on the AW139. The results provide a baseline for further investigation into methods to protect aircrew during the coronavirus pandemic.
Related Concept Videos
Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...
Factors Affecting Pulmonary Ventilation
Alveolar Surface Tension
The alveolar fluid lines the luminal surface of the alveoli and exerts a force called surface tension. This force is caused by the polar water molecules in the liquid being more strongly attracted to each...
Cardiopulmonary Resuscitation II: ACLS Airway Management
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...

