Development of a Simple and Powerful Analytical Method for Formaldehyde Detection and Quantitation in Blood Samples

Human beings are easily exposed to formaldehyde (FA) in a living environment. Entry of FA into the human body can have adverse effects on human health, depending on the FA concentration. Thus, a quantitative analysis of FA in blood is necessary in order to estimate its effect on the human body. In this study, a simple and rapid analytical method for the quantitation of FA in blood was developed. The total analysis time, including the pretreatment procedure, was less than 20 min. To ensure a stable analysis, blood samples were stabilized using tripotassium ethylenediaminetetraacetic acid solution, and FA was selectively derivatized using 2,4-dinitrophenylhydrazine as pretreatment procedures. The pretreated samples were analyzed using a high-performance liquid chromatography-UV system, which is the most common choice for analyzing small-molecule aldehydes like formaldehyde. Verification of the pretreatment methods (stabilization and derivatization) using FA standards confirmed that the pretreatment methods are highly reliable in the calibration range 0.012-5.761 ng μL^-1 (slope = 684,898, R ² = 0.9998, and limit of detection = 0.251 pg·μL^-1). Analysis of FA in the blood samples of a Yucatan minipig using the new method revealed an average FA concentration of 1.98 ± 0.34 ng μL^-1 (n = 3). Blood samples spiked with FA standards were analyzed, and the FA concentrations were found to be similar to the theoretical concentrations (2.16 ± 0.81% difference). The method reported herein can quantitatively analyze FA in blood at a sub-nanogram level within a short period of time and is validated for application in blood analysis.