Facile Fabrication of Calcium-Doped Carbon for Efficient Phosphorus Adsorption

High phosphorus concentrations mainly result in environmental problems such as agricultural pollution and eutrophication, which have great negative influence on many natural water bodies. In this work, calcium lignosulfonate was employed to produce calcium-doped char at 400 and 800 °C. To compare the phosphorus adsorption behaviors of the two carbon materials, batch adsorption experiments were conducted in a phosphorus microenvironment. The factors including the initial solution pH, phosphorus concentration, and adsorbent amount were considered, and the main characteristics of calcium-doped chars before and after adsorption were assessed. The results revealed that the phosphorus removal processes fitted both the Freundlich and pseudo-second-order-kinetic models. According to the Langmuir model, the maximum adsorption capacities of the two adsorbents obtained at 400 and 800 °C toward phosphorus (50 °C) were 53.22 and 17.77 mg/g adsorbent, respectively. The former was rich in calcium carbonate (CaCO₃) and hydroxyl and carboxyl groups, and it mainly served as a precipitant and a chelating agent, while the latter with a high surface area was dominant in P adsorption.