A simple technique for measuring the activity size distribution of radon and thoron progeny aerosols

In this study, a portable cascade impactor was developed to more efficiently determine the activity size distribution of attached radon and thoron progeny in a natural environment. The developed impactor consisted of four stages with a backup filter stage for collection of the aerosol samples. The aerosol cut points were set for 10, 2.5, 1, and 0.5 μm at a sampling rate of 4 L min^-1. Five CR-39 chips were used as alpha detectors for each stage. To separate the alpha particles emitted from radon and thoron progeny, the CR-39 detectors were covered with aluminium-vaporized Mylar films. The thickness of each film was adjusted to allow alpha particles emitted from radon and thoron progeny to reach the surface of the CR-39 detectors. The particle cut-off characteristics of each stage were determined by mono-dispersive aerosols with particle sizes ranging from 0.1 to 1.23 μm from the collection efficiency curve. The test results showed that the respective cut-off size of stages 3 and 4 were close to the designed cut-points. Validation of the technique by comparison with two commercial devices confirmed that the developed technique could provide the necessary information to estimate the activity size distribution of attached radon and thoron progeny for dose assessment, especially, in a field survey where direct electric power is not available.