Impact breakage of single pharmaceutical tablets in an air gun

Milling is commonly used for controlling the size distribution of granules in the pharmaceutical dry granulation process. A thorough understanding of the breakage of single compacts is crucial in unravelling the complex interactions that exist between different pharmaceutical feed materials and the mill process conditions. However, limited studies in the literature have examined the impact breakage of single pharmaceutical compacts. In this study, pharmaceutical powders including the microcrystalline MCC 101, MCC 102 and MCC DG were compressed at different pressures and tablets with different porosities and thicknesses were produced. Impact breakage tests were conducted in an air gun and the tablet impact velocities and breakage patterns were analysed using a Phantom ultrahigh-speed camera. It was observed that the tablet breakage rate and the amount of fines reduced as the tablet porosity decreased. In addition, thin tablets with low porosity exhibited semi-brittle fracture and less intense crack propagation while thick tablets with high porosity primarily disintegrated into fine fragments. Thus, this study provides a better understanding of the breakage behaviour of different pharmaceutical materials and can potentially be used to describe the breakage modes of compacts in the ribbon milling processes.