Related Experiment Video
Updated: Nov 20, 2025

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors
Published on: June 23, 2018
Simultaneous Photomultiplication Improvement and Response Acceleration for High-Performance Lateral Polymer
Meihua Shou1, Qinglei Zhang1, Shicheng Xiong1
1Institute of Polymer Optoelectronic Materials and Devices, Key Laboratory of Luminescence from Molecular Aggregates of Guangdong Province, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, P. R. China.
Abstract:
In organic photodetectors, photomultiplication is mainly originated from interfacial and/or bulk charge traps, which induces slow response due to the slow release of trapped charges and strongly limits the optimization of the overall performance. This study has exhibited a remarkable case that the gain (>1) and response speed of the lateral photodetectors are promoted simultaneously and effectively by increasing the trap ratio. For lateral photodetectors with silver nanoparticles and PDPPBTT:PC61BM bulk heterojunction, the gain increases from 12.7 to 19.8 and the fall time decreases from 313.4 to 172.9 ms as the PC61BM ratio increases from 5:1 to 1:1. The lateral photodetector structure with a long electrode distance has been testified to play the key role for simultaneous promotion compared with vertical photodiodes, allowing the charges to trap well in the PC61BM-rich phase at a high PC61BM ratio and accumulation of multiple built-in electric fields. The long channel distance and silver nanoparticles also effectively restrain the increment of dark current with PC61BM loading, resulting in a high detectivity of 1.7 × 1012 Jones under 0.031 mW cm-2 @ 820 nm. It is of great theoretical and practical value for the high-performance photodetectors with simultaneous high photomultiplication and quick response.
More Related Videos
08:29Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017
07:32Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
Published on: January 29, 2017