Study on the Measurement of Laser Drilling Depth by Combining Digital Image Relationship Measurement in Aluminum

In this study, laser processing equipment was used to drill aluminum alloy materials and with different auxiliary mechanisms, the deformation around the holes after processing was observed. The experimental results show that, due to the high temperature generated during laser processing, a large thermal gradient causes thermal stress to be introduced into the test piece and outward expansion deformation occurs. In this study, the digital image correlation and residual stress detection methods were applied. Based on the correlation between the drilled hole depth and the hole deformation, the hole depth of the laser processing was estimated. The average coefficient of determination for all auxiliary mechanisms is 0.82. The experimental results confirm that the digital image correlation method can be used to estimate the hole depth of laser processing.