Science- and risk-based strategy to qualify prefillable autoclavable syringes as primary packaging material

To develop a science and risk based strategy to qualify a prefillable autoclavable cyclic olefin polymer (COP) syringe as a container for multiple drug products in a hospital pharmacy setting METHODS: Different extraction studies were performed with different solution characteristics: phosphate buffer batches (Na₂HPO₄ / NaH₂PO₄ in NaCl 0.9%) at different pH values, NaCl 0.9% batches, isopropyl alcohol (IPA) 5% in water and batches with Water For Injections (WFI) at different pH values. The filled syringes were terminally sterilised. The syringes were stored at room temperature (20°C±5°C).Following different monographs of the European Pharmacopoeia several tests were performed on the different batches. Analyses were performed at t=0, 1, 2, 3, 4, 5, 6, 9, 12, 18, 24 and 36 months for the general tests. For the subvisible particles, sterility and closure integrity a bracketing scheme was applied during 36 months.

Low levels of extractables were measured for the different solutions. The test for subvisible particles, sterility and closure integrity all met predefined requirements. In the 5mL and 50mL syringes different concentrations of silicon were measured. Overall higher silicon concentrations were measured for the 50mL syringes.

The chosen strategy for the qualification program provided an adequate understanding about the extractables that could leak from the syringes. The cyclic olefin polymer syringes including stopper and tip cap were found to be suitable as primary packaging materials for the production of water based products.