Related Experiment Video
Updated: Nov 19, 2025

Design and Construction of an Urban Runoff Research Facility
Published on: August 8, 2014
Comparison of blue-green solutions for urban flood mitigation: A multi-city large-scale analysis
Elena Cristiano1, Stefano Farris1, Roberto Deidda1
1Dipartimento di Ingegneria civile, ambientale e architettura-Sezione Idraulica, Facoltà di Ingegneria Università degli Studi di Cagliari, Cagliari (CA), Italy.
Abstract:
Flooding risk in cities has been recently exacerbated by increased urbanization and climate change, often with catastrophic consequences in terms of casualties and economic losses. Rainwater harvesting systems and green roofs are recognized as being among the most effective blue-green mitigation measures. However, performances of these systems have currently been investigated only at laboratory or very-small local scales. In this work, we assess the potential benefit of the extensive installation of these solutions on all the rooftops of 9 cities, with different climatological and geographical characteristics. Both surface discharge reduction and delay between rainfall and runoff peak generation have been investigated. Green roofs ensure a larger average lag time between rainfall and runoff peaks than rainwater harvesting systems, without significant differences between intensive and extensive structures. On the other hand, the cost-efficiency analysis, considering the entire urban area, shows a higher retention capacity with a lower financial investment for rainwater harvesting rather than for green roofs in most cases. For extreme rainfall events, large-scale installation of rainwater harvesting systems coupled with intensive green roofs over the entire city have shown to be the most efficient solution, with a total discharge reduction that can vary from 5% to 15%, depending on the city characteristics and local climate.
Related Concept Videos
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Applications of GIS: Disaster Management and Emergency Response
Manipulation and Analysis
Typical Model Studies
Design Example: Alignment of a Road Line Using GIS
Responses to Drought and Flooding

