Integrating enzymatic hydrolysis into subcritical water pretreatment optimization for bioethanol production from...

The conversion of lignocellulosic biomass to bioethanol is a potential approach to alleviate the energy crisis and environmental deterioration. To improve the conversion efficiency of bioethanol from wheat straw (WS), the optimization of subcritical water pretreatment and high solid hydrolysis were investigated in this study. Response surface methodology (RSM) accompanied with glucose concentration after enzymatic hydrolysis as a more reasonable response value was applied for the pretreatment optimization, and the optimum conditions were obtained as 220.51 °C of extraction temperature, 22.01 min of extraction time and 2.50% (w/v) of substrate loading. After pretreatment, the hemicellulose decreased by 18.37%, and the cellulose and lignin increased by 25.92% and 8.81%, respectively, which were consistent with the destroyed microstructure and raised crystallinity. The high efficiency of separate hydrolysis and fermentation (SHF) was verified by five commercial cellulases, and yields of hydrolysis and fermentation were 77.85-89.59% and 93.34-96.18%, respectively. Based on the high solid (15%) hydrolysis and fermentation, the ethanol concentration was significantly improved to 37.00 g/L. Interestingly, 64.47% of lignin was accumulated in the solid residue after enzymatic hydrolysis and it did not affect the efficiency of SHF, which further suggested that subcritical water mainly affected the structure of WS rather than the removal of lignin. Therefore, subcritical water pretreatment combined with high solid hydrolysis is a more effective solution for bioethanol conversion, which is also a promising strategy to utilize all components of lignocellulosic biomass.