A Greener Amidoximation Process for Fabrication of Popular Uranium Complexing Fiber Using Water as the Single Solvent

A mixed water-organic solvent used for amidoximation increased the production cost of an amidoxime-based polymer sorbent and was not environmentally friendly as well. In this work, the amidoximation of an ultrahigh molecular weight polyethylene fiber co-grafted with acrylonitrile and methacrylic acid was carried out in aqueous solution without the use of an organic solvent. The effects of amidoximation parameters including NH₂OH concentration, temperature, time, and various solvents on the uranium adsorption performances in both uranium-spiked brine and simulated seawater were investigated. Results indicated that the optimal amidoximation parameters were 5% (w/v) NH₂OH, 80 °C, and 24 h. The uranium adsorption capacities of the sorbents amidoximated in aqueous solution were comparable with those of sorbents amidoximated in the various mixed water-organic solvents. Moreover, in comparison with both acidic (pH ∼3) and alkalic (pH ∼11) aqueous solution, the sorbent amidoximated in neutral (pH ∼7) NH₂OH aqueous solution achieved higher uranium adsorption capacities in both uranium-spiked brine (112.4 mg/g) and simulated seawater (7.4 mg/g). Additionally, potassium hydroxide (KOH) treatment was a necessary process and indeed significantly increased the uranium adsorption capacity.