Emissions of particulate PAHs from solid fuel combustion in indoor cookstoves
Wei Du1, Jinze Wang2, Shaojie Zhuo3
1Key Laboratory of Geographic Information Science of the Ministry of Education, School of Geographic Sciences, East China Normal University, Shanghai 200241, China; Laboratory of Earth Surface Processes, College of Urban and Environmental Sciences, Peking University, Beijing 100871, China.
Abstract:
Residential solid fuel combustion is a major emission source of PAHs (polycyclic aromatic hydrocarbons) in most developing countries, including China; however, accurate estimates of PAH emissions are often challenged by limited real-world emission factors (EFs) under field conditions, which can hardly be repeated in laboratory-controlled tests. In this study, a series of field measurements was conducted to determine the emissions of 28 PAHs from different fuel-stove combinations. A total of 14 fuel-stove combinations were studied. The total EFs of 28 PAHs (EFPAH28), on the basis of fuel mass, ranged from 20.7 to 535 mg/kg, with relatively lower EFs for coal than for biomass. Biomass burning in gasifier stoves had lower PAH EFs and fewer toxic PAH species than biomass burning in traditional brick stoves. Fuel type was a significant factor affecting PAH emissions, while stove difference had a relatively smaller influence. Much higher EFs were found from these field tests than from the idealized laboratory tests, which indicated significant underestimation in inventories based on the laboratory-based EFs. Biomass and coal had different profiles, with larger intra-fuel variations in coal than those in biomass. Highly variable values of some, though not all, commonly used isomer ratios indicated substantial biases in source apportionment relying on single or simple ratios without correction, and the MCE was found to be significantly corrected with some ratios.
Related Concept Videos
Flame Photometry: Overview
Enthalpy and Heat of Reaction
Atomic Absorption Spectroscopy: Atomization Methods


