3D-Printing Replication of Porous Media for Lab-Scale Characterization Research

Simplifying fluid-flow physics in conventional reservoirs is convenient by assuming uniform lithology and system-geometry with minimal rock/hydrocarbon interactions. Such simplification restrains mathematical models' ability to simulate unconventional reservoirs' actual flow behavior and production performance. Researchers can achieve precise adaption for the physics of fluid flow in porous media if they geometrically characterize the system under study appropriately, and there are minimal interactions indeed. 3D-printed replicas of porous-rock samples obey this criterion. In this work, we used image-processing tools used for creating presentable porous and permeable replicas of different scales and configurations of the petroleum system from lab-scale to field-scale. The workflow of 3D-printed replicas creation is presented for replicas of conventional core samples, naturally and synthetically fractured cores, geological drilling units of multistage fractured horizontal wells, and full-field models, e.g., Norne field in Norway. These samples are ideal for experimentally testing the validity of the analytical or numerical models of oil and gas reservoirs in the laboratory, along with judging the quality of reservoirs' characterization. These replicas' ideality of these results from limited uncertainties of the geometry of the system under study and fluid/rock interactions because of the uniform composition. For validation purposes, 3D-printed replicas with different materials and 3D-printing technologies were created based on a reconstructed image-processed CT scan of their original Berea sandstone. These replicas were tested for storage capacity (porosity) and transport capacity (permeability) and compared with their original sample's capacities. The matched results proved replicas' ability to be used in oil and gas laboratory experimental research.