Related Experiment Video
Updated: Nov 18, 2025

10:12
Synchrotron X-ray Microdiffraction and Fluorescence Imaging of Mineral and Rock Samples
Published on: June 19, 2018
9.3K
Iterative energy self-calibration of Fe XANES spectra. Erratum
Michael W M Jones1, Guilherme Mallmann2, Jeremy L Wykes3
1Institute for Future Environments, Central Analytical Research Facility, Queensland University of Technology, Brisbane, Australia.
Journal of Synchrotron Radiation
|February 10, 2021
Abstract:
A correction is made to the paper by Jones et al. (2020). [J. Synchrotron Rad. (2020), 27, 207-211].
More Related Videos
Related Concept Videos
NMR Spectrometers: Resolution and Error Correction
914
When magnetic nuclei in a sample achieve resonance and undergo relaxation, the signal detected in NMR is an approximately exponential free induction decay. Fourier transform of an exponential decay yields a Lorentzian peak in the frequency domain. Lorentzian peaks in an NMR spectrum are defined by their amplitude, full width at half maximum, and position, where the peak width is governed by the spin-spin relaxation time alone. In real experiments, however, the applied magnetic field is rendered...
914
Emission Spectra
73.6K
When solids, liquids, or condensed gases are heated sufficiently, they radiate some of the excess energy as light. Photons produced in this manner have a range of energies, and thereby produce a continuous spectrum in which an unbroken series of wavelengths is present.
73.6K
UV–Vis Spectroscopy: Woodward–Fieser Rules
27.0K
UV–Visible absorption spectra of conjugated dienes arise from the lowest energy π → π* transitions. The light-absorbing part of the molecule is called the chromophore, and the substituents directly attached to the chromophore are called auxochromes. A strong correlation exists between the absorption maxima, λmax, and the structure of a conjugated π system. The Woodward–Fieser rules predict the value of λmax for a given structure by adding the...
27.0K
Atomic Emission Spectroscopy: Interference
452
In atomic emission spectroscopy (AES), high-temperature atomizers excite a broad range of elements and molecules that generate complex emissions from sources such as oxides, hydroxides, and flame combustion products in the flame or plasma. Several strategies can be employed to minimize spectral interferences caused by overlapping emission lines or bands. These include increasing instrument resolution, choosing alternative emission lines, optimally placing the detector in low-background regions,...
452

