2D metal azolate framework as nanozyme for amperometric detection of glucose at physiological pH and alkaline medium

The synthesis of Co-based two-dimensional (2D) metal azolate framework nanosheets (MAF-5-Co^II NS) is described using a simple hydrothermal method. The product was isostructural to MAF-5 (Zn). The as-prepared MAF-5-Co^II NS exhibited high surface area (1155 m²/g), purity, and crystallinity. The MAF-5-Co^II NS-modified screen-printed electrode (MAF-5-Co^II NS/SPE) was used for nonenzymatic detection of glucose in diluted human blood plasma (BP) samples with phosphate buffer saline (PBS, pH 7.4) and NaOH (0.1 M, pH 13.0) solutions. The MAF-5-Co^II NS nanozyme displayed good redox activity in both neutral and alkaline media with the formation of Co^II/Co^III redox pair, which induced the catalytic oxidation of glucose. Under the optimized detection potential, the sensor presented a chronoamperometric current response for the oxidation of glucose with two wide concentration ranges in PBS-diluted (62.80 to 180 μM and 305 to 8055 μM) and NaOH-diluted (58.90 to 117.6 μM and 180 to 10,055 μM) BP samples, which were within the limit of blood glucose levels of diabetic patients before (4.4-7.2 mM) and after (10 mM) meals (recommended by the American Diabetes Association). The sensor has a limit of detection of ca. 0.25 and 0.05 μM, respectively, and maximum sensitivity of ca. 36.55 and 1361.65 mA/cm²/mM, respectively, in PBS- and NaOH-diluted BP samples. The sensor also displayed excellent stability in the neutral and alkaline media due to the existence of hydrophobic linkers (2-ethyl imidazole) in the MAF-5-Co^II NS, good repeatability and reproducibility, and interference-free signals. Thus, MAF-5-Co^II NS is a promising nanozyme for the development of the disposable type of sensor for glucose detection in human body fluids. Graphical abstract.