Quantification and modeling of the response of surface biofilm growth to continuous low intensity UVC irradiation

Though germicidal UV radiation is widely applied for disinfection of water and food, it may also be used to prevent bacterial growth and colonization on surfaces within engineered systems. Emerging UV source technologies, such as ultraviolet-C (UVC) LEDs, present new opportunities for deterring biofilms within certain devices, including medical equipment, food equipment, and potentially in plumbing fixtures for prevention of opportunistic respiratory pathogen infections. Rational design for incorporation of UVC sources into devices with complex internal geometries is currently hampered by the lack of an engineering framework for predicting reductions in biofilm growth rates in response to continuous low-intensity irradiation. Herein we have developed an experimental apparatus and method for growing biofilms under concurrent UV irradiation and quantifying the resulting suppression of surface growth. Under accelerated growth conditions over 48 h, E. coli surface biovolume was reduced by 95% compared to control biofilms (grown in the dark) by a UV intensity of 50.5 µW/cm² (254 nm). The required intensity for biofilm prevention was higher than expected, given the UV dose response of the bacteria employed and the cumulative doses delivered to the test surfaces. The results indicate that biofilms can establish even under irradiation conditions that would result in complete inactivation of planktonic cells, likely due to the shielding effects of colloidal material and microbial exudates. A pseudo-mechanistic model was also developed which correlated UV intensity to the resultant reduction in specific surface biovolume.