Related Experiment Video
Updated: Nov 17, 2025

The Effect of Anodization Parameters on the Aluminum Oxide Dielectric Layer of Thin-Film Transistors
Published on: May 24, 2020
Metal Reaction-Induced Bulk-Doping Effect in Forming Conductive Source-Drain Regions of Self-Aligned Top-Gate
Huan Yang1, Xiaoliang Zhou1, Haishi Fu1
1School of Electronic and Computer Engineering, Peking University, Shenzhen 518055, China.
Abstract:
In this paper, the aluminum (Al) treatment-induced doping effect on the formation of conductive source-drain (SD) regions of self-aligned top-gate (SATG) amorphous indium gallium zinc oxide (a-InGaZnO or a-IGZO) thin-film transistors (TFTs) is systematically investigated. Average carrier concentration over 1 × 1020 cm-3 and sheet resistance of around 500 Ω/sq result from the Al reaction doping. It is shown that the doping effect is of bulk despite the treatment at the surface. The doping process is disclosed to be a chemical oxidation-reduction reaction, that generates defects of oxygen vacancies and metal interstitials at the metal/a-IGZO interface. Both the generated oxygen vacancies and metal interstitials act as shallow donors, and the oxygen vacancies diffuse rapidly, leading to the bulk-doping effect. The fabricated SATG a-IGZO TFTs with the Al reaction-doped SD regions exhibit both high performance and excellent stability, featuring a low width-normalized SD resistance of about 10 Ω cm, a decent saturation mobility of 13 cm2/(V s), an off current below 1 × 10-13 A, a threshold voltage of 0.5 V, a slight hysteresis of -0.02 V, and a less than 0.1 V threshold voltage shift under 30 V gate bias stresses for 2000 s.
Related Concept Videos
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

