Related Experiment Video
Updated: Nov 16, 2025

A Test Bed to Examine Helmet Fit and Retention and Biomechanical Measures of Head and Neck Injury in Simulated Impact
Published on: September 21, 2017
An evaluation of occupant dynamics during moderate-to-high speed side impacts
1Atarod Biomechanics Laboratories, Irvine, CA, USA.
Abstract:
The present study examined trends in occupant dynamics during side impact testing in vehicle models over the past decade. "Moderate-to-high" speed side impacts (delta-V ≥15 km/h) were analyzed. The Insurance Institute for Highway Safety (IIHS) side impact crash data was examined (N = 126). The test procedure involved a moving deformable barrier (MDB) impacting the sides of stationary vehicles at 50.0 km/h. Instrumented 5th-percentile female SID IIs dummies were positioned in the driver and left rear passenger seats. Occupant head, neck, shoulder, torso, spine, and pelvis/femur responses (times histories, peaks, and time-to-peak values) were evaluated and compared to injury assessment reference values (IARVs). The effects of delta-V, vehicle model year, vehicle body type, and occupant seating position on dynamic responses were examined. The vehicle lateral delta-Vs ranged from 15.9 to 34.5 km/h. The MY2018-2020 demonstrated lower peak dynamics than MY2010-2013, for the driver head acceleration (53.7 ± 11.3g vs 46.4 ± 11.6g), shoulder lateral forces (1.7 ± 0.7 kN vs 1.5 ± 0.2 kN), average rib deflection (29.8 ± 8.3 mm vs 28.4 ± 6.2 mm), spine accelerations at T4 (51.4 ± 23.4g vs 39.6 ± 5.9g) and T12 (56.3 ± 18.5g vs 45.2 ± 9.6g), iliac forces (1.9 ± 1.0 kN vs 1.2 ± 0.9 kN), and acetabular forces (1.9 ± 0.8 kN vs 1.3 ± 0.5 kN). The driver indicated statistically higher dynamic responses than the left rear passenger. Higher wheelbase vehicles generally showed lower occupant loading than the smaller vehicles. In conclusion, a reduction in occupant loading and risks for injury was observed in vehicle models over the past decade. This provides further insight into injury mechanisms, occupant dynamics simulations, and seat/restraint design.
Related Concept Videos
Impact
When particles with different initial velocities collide, they induce deformation by applying equal and opposite impulses. At the point of maximum deformation, the particles move together with...
Impulse
Additionally, it can be shown that the...
Types of Impact
The coefficient of restitution is a metric for understanding the dynamics of impacts. It quantifies the ratio of relative velocity...
Elastic Collisions: Case Study
Collisions in Multiple Dimensions: Problem Solving
A small car of mass 1,200 kg traveling east at 60 km/h collides at an intersection with a truck of mass 3,000 kg traveling due north at 40 km/h. The two vehicles are locked together. What is the...
Normal and Tangetial Components: Problem Solving

