Efficient catalytic degradation of toluene at a readily prepared Mn-Cu catalyst: Catalytic performance and reaction...

Fabricating of economical transitional metal oxide-based materials with satisfied low-temperature catalytic performance and application perspective is still a challenge in deep degradation of VOCs. Here, Mn-Cu bimetallic oxides were facilely prepared by one-step hydrothermal-redox method, which displayed much higher catalytic activity in toluene oxidation than those synthesized by hydrolysis-driven redox-precipitation or co-precipitation approach. It is shown that the lattice defect and oxygen vacancy concentration over prepared materials can be tuned by controlling Cu/Mn molar ratio. Amongst, spinel structured MnCu_0.5 exhibited the highest catalytic activity, superior durability and water resistance in toluene total oxidation owing to abundant surface adsorbed oxygen species, excellent low-temperature reducibility, and high amounts of Cu⁺ and Mn³⁺. In detail, the reaction rate of MnCu_0.5 was over 9.0 times higher than that of MnCu_0.75, MnCu_0.75-P and MnCu_0.75-H₂O₂ at relative low temperature of 210 °C. The cyclic redox process with easier oxygen species mobility played a key role in the catalytic oxidation of toluene. Typical reaction intermediates as benzyl alcohol, benzaldehyde, benzene, phenol, and benzoquinone could be detected by PTR-MS, which further decomposed to acetone, ethanol, ketone, acetic acid, methanol, formaldehyde and acetaldehyde species by ring opening before total mineralization.