Zinc oxide nanostructures and stearic acid as surface modifiers for flax fabrics in polylactic acid biocomposites

Different surface treatments including mercerization, stearic acid and growth of zinc oxide nanorods as well as their combinations were exploited to address their effects on the properties of green composites based on polylactic acid (PLA) and flax fabrics. The resulting fabrics were morphologically (SEM), crystallographically (XRD) and thermally (TGA) characterized, showing no significant changes with respect to the untreated samples. In contrast, tensile and flexural properties of composites produced by compression moulding were significantly influenced. A combination of mercerization and environmentally friendly stearic acid treatment turned the character of the flax fabric from hydrophilic to hydrophobic, and led to improved bending and tensile strengths by 20% and 12%, respectively, compared to untreated composites. The presence of ZnO nanorods promoted an increase in flexural and tensile stiffness by 58% and 31%, respectively, but at the expense of strength, with reductions ascribed to the degradation of polylactic acid under high-temperature conditions favoured by ZnO, as confirmed by a reduction in the initial thermal degradation temperature up to 26%. These latter composites can be suggested in those applications where a suitable combination of flexural properties and a shorter persistence in the environment is desired.