Exploring the effects of microalgal biomass on the oil behavior in a sand-water system

This study focused on the impact of microalgal biomass on the oil behavior in a sand-water system. The microalgal biomass was characterized, and the interaction between microalgal biomass and oil was analyzed through Fourier transform infrared (FTIR) spectroscopy. The effects of different conditions including microalgal biomass dose, pH, temperature, and salinity on the oil behavior were investigated. A two-level factorial analysis was also used to further explore the interactions of these conditions. The microalgal biomass was found to be the most influential parameter for the residual crude oil on sand. Higher microalgal biomass dose resulted in less residual oil on sand. The remaining oil decreased with increasing solution pH from 4 to 7, and an increase of remaining oil was observed when the pH was further increased above 7. In addition, temperature and salinity could affect the removal of crude oil in the presence of microalgal biomass. Increasing the temperature could result in less residual oil on sand and there was higher oil removal at the high salinity. The effects of microalgal biomass on the oil behavior could also be impacted by environmental conditions. The results of this study indicate that the presence of algae in the oiled shoreline can be considered in the comprehensive evaluation of spill risk and prediction of oil fate.