Microwave-based strategies for sample preparation and halogen determination in blood using ICP-MS

In this work, two microwave-assisted sample preparation methods based on combustion and ultraviolet digestion for futher determination of Br, Cl, and I in blood by inductively coupled plasma mass spectrometry were proposed. For microwave-induced combustion (MIC), blood was spotted on square pieces of Munktell TFN paper, and water and diluted NH₄OH were evaluated as absorbing solutions. The stability of the analytes in the spotted blood was also evaluated. During 90 days, no changes of halogen content were observed for samples (with and without anticoagulant) on paper stored in a desiccator at 20 ± 5 °C. Whole blood was also digested by microwave-assisted ultraviolet digestion (MAD-UV). Some parameters as the volume of HNO₃ solution, the influence of H₂O₂, and the effect of UV radiation were investigated. The interferences caused by C and K on halogen determination were carefully investigated. The results for MIC and MAD-UV and Br, Cl and I determination by ICP-MS presented no difference. The accuracy of MIC and MAD-UV was also evaluated by analyte spike with reference solutions of Br, Cl and I using inorganic species and also organic I standard (T4-levothyroxine). For both methods, recoveries were 94 and 108% for Br, 96 and 103% for Cl, and 104 and 97% for I. In case of organic I, recoveries were 99 and 111% for MIC and MAD-UV, respectively. The limits of quantification for MIC and MAD-UV after ICP-MS determination were 0.06 and 0.04 μg g^-1 for Br, 14 and 30 μg g^-1 for Cl and 12 and 8 ng g^-1 for I, respectively. The proposed methods provide a suitable digestion approach, assuring safety and high digestion efficiency for further halogen determination in blood, with the possibility to use in clinical analysis.