Highly Efficient Low-Concentration Phosphate Removal from Effluents by Recoverable La(OH)₃/Foamed Nickel Adsorbent

Lanthanum-based materials have attained increasing attention because of their high adsorption property of phosphate ions and their environmental harmlessness. However, challenges still remain to improve the phosphate adsorption capacity and find suitable materials for the lanthanum attachment substrate. Nickel foam with characteristics such as excellent uniformity, large specific surface area, high porosity, and low conductivity is considered to be the alternative for the preparation of lanthanum-based adsorption materials. An efficient adsorbent foamed nickel-based La (OH)₃ nanowire was first prepared with a facile one-step electrodeposition method. The batch static adsorption tests of simulative wastewater (e.g., coexisting ions and solution pH values) were employed to investigate the phosphate adsorption kinetics and solution matrix effects of the materials. The results indicate that the composite exhibits fast adsorption kinetics within 30 min and high selectivity to phosphate under interference from competing ions. The pH value of wastewater has great influence on the absorption of phosphate, and optimal adsorption capacity can be achieved over a pH 4-6 range. Various findings revealed that the adsorption behavior of lanthanum hydroxide/foamed nickel [La(OH)₃/Ni] followed inner-sphere adsorption through the ligand-exchange mechanism. The prepared material is expected to be an enormous potential candidate for the removal of low-concentration phosphorus from effluents.