Response analysis of the nodes of pipe networks under seismic load

Transient ground displacement (TGD) that is caused by earthquakes can damage underground pipes. This damage is especially critical for the joints, elbows and tees of the pipes which play an important role in the operation of a pipe network. In this study, a scale pipe network with both elbows and tees, as well as some components of the pipe network with only tees or elbows, has been investigated. The response of the nodes of a pipe network, when installed in non-uniform geology, was analyzed using the shaking table test and ABAQUS finite element simulation. This paper has firstly introduced the preparation of the test and the developed finite element model. Then the system response in terms of strain, the friction, the bending deformation, the node deformation amplification coefficient and the pipe-soil relative displacement along the pipe axis of the pipe network and two pipe network components have been analyzed explaining the correlation between these responses. Finally, the influence of elbows and tees on the pipe network was analyzed, and the conclusions that have been reached about how tees and elbows can change the response of a pipe network during an earthquake can provide theoretical support for the seismic design and layout of an underground pipe network.