Development and numerical modelling of a novel UV/H₂O₂ rotating flow reactor for water treatment

The ultraviolet photochemical degradation process is widely applied in wastewater treatment due to its low cost, high efficiency and sustainability. In this study, a novel rotating flow reactor was developed for UV-initiated photochemical reactions. The reactor was run in a continuous flow mode, and the tangential installation of the inlet and outlet on the annular reactor improved reaction rates. Numerical modelling, which combined solute transport, radiation transfer and photochemical kinetic degradation processes, was conducted to evaluate improvement compared to current reactor designs. Methylene Blue (MB) decomposition efficiency from the modelling results and the experimental data agreed well with each other. The model results showed that a rotational motion of fluid was well developed inside the designed reactor for a wide range of inflow rates; the generation of ·OH radicals significantly depended on UV irradiation dose, and thus the degradation ratio of MB showed a strong correlation with the UV irradiation distribution. In addition, the comprehensive numerical modelling showed promising potential for the simulation of UV/H₂O₂ processes in rotating flow reactors.