Cross-linked Poly(Octadecyl Acrylate)/Polybutadiene Shape Memory Polymer Blends Prepared by Simultaneous Free Radical...

A semi-crystalline, shape memory polymer (SMP) is fabricated by free radical cross-linking, polymerization, and grafting in a blend of n-octadecyl acrylate and polybutadiene (PB). Poly(n-octadecyl acrylate) (PODA) is a side-chain crystalline polymer, which serves as the structure-fixing network counterbalancing the elastically deformed, cross-linked polymer network. At a constant 50/50 ratio of monomer and polymer the amount of free radical initiator, dicumyl peroxide (DCP) is varied from 1% to 5% w/w PB. From swelling measurements and calculation of the cross-link density it is determined that DCP produces greater than one cross-link per DCP molecule. It is found that lower cross-linking efficiency is favorable for higher shape fixity. This lower efficiency is found to produce a higher degree of crystallinity of the PODA in the 2-5% DCP samples, which is determined to be the main driver of higher shape fixity of the polymer. A SMP with >90% fixity and 100% recovery at uniaxial strains from 34-79% is achieved. This material should be useful for mold processing of shape memory articles. This approach provides a method to decouple the elastomeric and thermoplastic portions of a SMP to convert commodity elastomers into SMPs and tailor the shape memory response.