Effects of operating parameters on co-gasification of coconut petioles and refuse-derived fuel

Coconut agro-industry in the western region of Thailand generates a large amount of residues. This study investigated the energy production potential of discarded coconut petioles, with a focus on co-gasification with refuse-derived fuel (RDF). Gasification tests involving petioles, RDFs and their mixtures (25%, 50%, 75% or 100% by weight) were conducted in a laboratory-scale fixed bed reactor. Fuel samples of 5 g were gasified at 700°C-900°C for 60 minutes, using simulated air (79% N₂ to 21% O₂, by volume) as a gasifying agent. Gasification of petioles generated producer gas with lower heating values, estimated at 0.43-0.75 MJ Nm^-3, while RDF produced 0.92-1.39 MJ Nm^-3. Adding greater quantities of RDF to the fuel mixture resulted in an increase in the heating value of the producer gas and cold gas efficiency. The operating temperatures and gasifying-agent flow rates affected the efficiency of process differently, depending on the fuel composition. However, the maximum cold gas efficiency from both fuels was detected in tests conducted at 800°C. In co-gasification and pure refuse-derived-fuel tests, higher temperatures and gasifying-agent flow rates led to outputs with higher energy yields. Our findings suggested that co-gasification of petiole is a viable alternative waste-treatment technology for this region.